Supply and fix 2,5mm thick x 1,2m wide Superflex fully-flexible vinyl sheeting manufactured in accordance with SANS 786 and laid in FloorworX No. 62 acrylic adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of between 5,5m² and 6,5m² per litre or FloorworX No. 71 contact adhesive spread using a flat trowel, brush or paint roller at a rate of approximately 3,5m² per litre (single surface application), applied to both the sheeting and the previously prepared Class 1 sub-floor in accordance with SANS 10070, using a reliable Self-Leveller when required, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive, joints must be butted, grooved and heat welded using a FloorworX Welding Rod, ensuring that the welding rod bonds to more that 70% of the sheet thickness. The newly laid floor must, after 48 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and the sealed with three coats of FloorworX Silk Matt or Gloss Sealer.