Supply and fix 3,5mm thick x 1,0m wide FloorworX Industrial Floor surface embossed (linen weave) vinyl sheeting manufactured to specification and adhered with FloorworX No. 71 contact adhesive applied to both sheeting and the previously prepared Class 1 sub-floor in accordance with SANS 10070 (making use of a using a reliable Self-Leveller when required) using a brush or paint roller at the rate of approximately 3,5m² per litre per single application, including all cutting and waste. The sheeting must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive, joints must be butted, grooved and heat welded using a FloorworX Welding Rod, ensuring that the welding rod bonds to more that 70% of the sheet thickness. The newly laid floor must, after 48 hours, be stripped using FloorworX Stripper, scrubbed using a diluted solution of FloorworX Rinse and the sealed with three coats of FloorworX Silk Matt or Gloss Sealer.