Supply and install Forest fx PUR flexible PVC sheet flooring in [Alloyed Timber, American Oak, Blanched Oak, Brazilian Walnut, Classic Oak, Eton Oak Parquet, European Oak, French Walnut, Grey Sawmill Oak, Mahogany, Newport Oak, Oiled Oak, Oslo Oak, Parish Oak Parquet, Rock Salt Oak, Rural Deckwood, Rustic Oak, Smoked Oak] [2.00] mm thickness having the following laminated construction: circa 0.70mm clear PVC wear layer, a fibreglass reinforced integral print layer and circa 1.30mm of PVC backing, the flooring shall incorporate a specially formulated polyurethane reinforcement, to significantly reduce maintenance costs, in accordance with EN ISO 10582/EN 649, the in-use classification must be at least 23/34/43 as described in EN ISO 10874: i.e. domestic areas with intense use; commercial areas with very heavy traffic; and heavy light industrial areas, in respect of flame spread, the flooring shall have been fully tested to EN13501-1 and certified as having Class Bfl-S1, the product must have been fully tested for abrasion resistance and meet the requirements of abrasion Group T, as defined in EN 649 and Binder Content Type 1 as defined in EN ISO 10582, this product does not accumulate static charges above 2kV and is classified as ‘antistatic’ when tested to EN1815, for specialist applications where there is a requirement to dissipate the electrostatic charge see the Polyflor ESD product ranges, with regards the European requirements EN 13893 for slip resistance, the flooring shall be classified DS, making it suitable for use in areas which are dry, when tested to DIN 51130 the product shall be classified as R10, for safety flooring with sustainable wet slip resistance, refer to the Polysafe ranges, in respect of light fastness, the flooring shall have been fully tested to EN ISO 105-B02 Method 3 as having a pass to ≥6, the flooring must be available in 2.01-meter width, including a 0.01-meter selvage for onsite trimming, to minimise the number of joints