Supply and install Polysafe Wood FX PUR flexible PVC sheet flooring in [Aged Oak, American Oak, Classic Oak, European Oak, Nero Oak, Oiled Oak, Roasted Limed Ash, Rustic Oak, Silver Oak, Sun Bleached Oak, Tropical Pine] [2.0] mm thickness, with the following construction: circa 0.7mm clear PVC wear layer with aluminium oxide granules incorporated throughout the full thickness - to impart enhanced slip resistance, a fibreglass reinforced integral print layer and circa 1.30mm of PVC backing, the flooring shall feature a high quality, cross-linked polyurethane reinforcement to provide superior cleaning benefits, life cycle maintenance savings and optimum appearance retention, the flooring material shall fully conform with the European Norm for safety flooring - EN 13845, in respect of flame spread, the flooring shall be categorised as Class Bfl-S1 according to EN 13501-1. The flooring shall have been fully tested to ASTM E648 by an independent test house and have a Class 1 rating, making it suitable for use in institutional, commercial and public buildings, the flooring must have been fully tested by an independent test house to the RRL Pendulum Test (4S Rubber/Slider 96) and have results of ≥36 in the wet, with a surface roughness of Rz ≥20μm, making it suitable for use in areas where enhanced slip resistance is required, the product must have been fully tested for abrasion resistance to EN 13845, passing the 50,000 cycles test and also meeting EN 660-2 Abrasion Group T, the flooring shall possess a valid Agrément certificate when laid in accordance with the instructions of Polyflor, with coved skirtings and welded joints, this product does not accumulate static charges above 2kV and is classified as ‘antistatic’ when tested to EN 1815. For specialist applications where there is a requirement to dissipate the electrostatic charge, see the Polyflor ESD product ranges, the flooring must be available in 2.01 metre width, including a 0.01 metre selvage for on-site trimming, to minimise the number of joints, the flooring is suitable for Use Area Classification 23/34/43, as defined in EN ISO 10874 (EN 685), in respect of light fastness, the flooring shall have been fully tested to ISO 105-B02 Method 3 and obtain ≥6