Supply and install [2.00] mm Polyflor Conductive ROF [Black[ flexible PVC sheet flooring with electrostatic conductive properties, homogeneous and monolayer in construction, electrostatic conductive properties must be present throughout the full product thickness, the flooring shall conform fully with the requirements of EN 649/ISO 10581, in respect of flame spread, the flooring shall have been fully tested to EN 13501-1 and certified as having Class Bfl-S1, achieving the criteria EN ISO 9239-1 ≥8kw/m2 and the mandatory requirement of EN ISO 11925-2 pass, it shall be tested to ASTM E648 and certified as having passed with a Class 1 rating, making it suitable for use in ordnance factories, in explosive handling areas(no protection from short circuit on a 240/250 volt mains), with regard to EN 13893 for slip resistance, the flooring shall be classified DS, making it suitable for use in areas which are predominantly dry, but with occasional spillage, the product must have been fully tested for abrasion resistance to the Frick Taber test EN 660: Part 2 and be in abrasion group M, as defined in EN 649, with regard to electrostatic conductive properties, the flooring must conform to the requirements of HTM2, tested to ASTM F150 the flooring must have a resistance 5 x 10⁴ ohms, when tested to EN 1081 R1/R2 the flooring must have a resistance of 5 x 10⁴ ohms, when tested to JSP 482, the flooring must have a resistance 5 x 10⁴ ohms, when tested to BS 2050 the surface resistance and resistance to earth should be 5 x 10⁴ ohms