Supply and install Acoustic Forest fx PUR flexible PVC sheet flooring in [American Oak, Classic Oak, Classic Walnut, European Oak, Oiled Oak, Rustic Oak, Smoked Oak] [3.7]mm thickness, it shall be heterogeneous in construction with a 0.65mm clear PVC wear layer, the flooring shall incorporate a specially formulated polyurethane reinforcement, to significantly reduce maintenance costs, in accordance with EN 651, the in-use classification must be at least 23/34/42 as described in EN ISO 10874 (EN 685): i.e. domestic areas with intense use; commercial areas with very heavy traffic; and general light industrial areas, when tested to EN ISO 10140-3 (EN ISO 140-8), the product should achieve an impact sound reduction of 19dB, with regards the EN 13893 test for slip resistance, the flooring shall be classified DS, making it suitable for use in areas which are predominantly dry, but with occasional wet spillage. When tested to DIN 51130, the flooring shall be classified as R10. For safety flooring with sustainable wet slip resistance, refer to the Polysafe ranges, in respect of flame spread, the flooring shall have been fully tested to EN 13501-1 and certified as having Class Bfl-S1, achieving the criteria EN ISO 9239-1 ≥8kW/m2 and the mandatory requirement of EN ISO 11925-2 pass, when tested to EN 423 (ASTM F 1303-99), the flooring should achieve excellent chemical resistance, in respect of light fastness, the flooring shall have been fully tested to ISO 105-B02 Method 3 as having a pass to ≥6, the product must have been fully tested for abrasion resistance and meet the requirements of abrasion Group T, as defined in EN 651, in respect of residual indentation, the flooring shall have been fully tested to EN 433 as having a pass to <0.2mm, the flooring must be available in 2.01 meter width, including a 0.01 meter selvage for on-site trimming, to minimise the number of joints, this product does not accumulate static charges above 2kV and is classified as ‘antistatic’ when tested to EN 1815. For specialist applications where there is a requirement to dissipate the electrostatic charge see the Polyflor ESD product ranges