Supply and install Bloc PUR single solid colour with a textured emboss, flexible PVC sheet flooring in [Caramel Blush, Classic Black, Clay Deep, Cool Breeze, Lemon Punch, Lilac Essence, Lime Crush, Loft White, Marine Blue, Nordic Sky, Red Beacon, Rock Salt, Soft Moss, Studio Grey, Urban Chic, Woodland Green] [2.00] mm thickness, shall have the following laminated construction: 0.7mm pigmented homogeneous PVC wear layer, with a 1.30mm PVC backing featuring a pimple emboss, shall incorporate a specially formulated polyurethane reinforcement, as with any plain material, the soil hiding properties are less than similarly coloured patterned floors, the frequency of a regular and well planned maintenance regime should be considered at the outset to ensure the plain floorcovering retains the optimum appearance, careful consideration should be given when choosing very light colours in highly trafficked areas, the use of a robust and effective dirt barrier system should be considered early in the specification chain, in accordance with EN ISO 10582/EN 649, the in-use classification must be at least 23/34/43 as described in EN ISO 10874: i.e. domestic areas with intense use; commercial areas with very heavy traffic; and heavy light industrial areas, in respect of flame spread, the flooring shall have been fully tested to EN13501-1 and certified as having Class Bfl-S1, the Binder Content shall be Type I as defined in EN ISO 10582, this product does not accumulate static charges above 2kV and is classified as ‘antistatic’ when tested to EN1815, for specialist applications where there is a requirement to dissipate the electrostatic charge see the Polyflor ESD product ranges, with regards the European requirement EN 13893 for slip resistance, the flooring shall be classified DS, making it suitable for use in areas which are predominantly dry, when tested to DIN 51130 the product shall be classified as R10, for safety flooring with sustainable wet slip resistance, refer to the Polysafe ranges, in respect of light fastness, the flooring shall have been fully tested to ISO 105-BO2 Method 3 as having a pass to ≥6, the flooring must be available in 2.01 metre width, including a 0.01 metre selvage for on-site trimming, to minimise the number of joints